Quarter round

Top grade solid clear softwood; Select grade quality means wood that is almost completely flawless with only the occasional tiny knot. This wood grade is prized for the superior quality finish it provides.

• Light, uniform grain wood that can be nailed or screwed without cracking;
• High dimensional stability, solid white pine can be used indoors or outdoors.

Specifics and Warnings:

It is highly recommended to sand wood moldings before applying a primer. Sanding facilitates the application of topcoats and enhances the natural resistance of white pine.

We suggest painting the moldings in a higher gloss tone than the walls. This will enhance the curves of the moldings and facilitate their maintenance.

Humidity and temperature changes (sunlight, heaters, fireplaces or other heat sources) can cause resin seeps that pass even through dyeing. Clean the resin with turpentine.

Apply a sealer to the 4 faces of moldings to avoid wood resin run-offs. (check with your paint company to add the right sealer).

48 to 72 hours before installing, allow the wood to acclimate to air at ambient heat. Do not store in the basement or in an unheated garage.