Pictogram menu Pictogram menu
Produit
Produit

Door stop

Profile: 7162
Code item: CJ0827162
Produit
Produit
Width 1-1/16"
Thickness 7/16"
Length 6'-10" (82")
Specie Finger jointed pine
Finish Natural
Other length(s) available
Description

Door stops are utilitarian door components that are attached to the center of frames. They serve as stops to allow doors to close properly and seal the contours between doors and their frames.

Warning

It is strongly recommended to sand wooden mouldings before applying primer. Applying a finishing coat becomes easier and further enhances the natural resistance of white pine. It is suggested to paint the mouldings with a higher gloss level than that of the walls. This will highlight their curves while making maintenance easier. Temperature and humidity changes in the house (sunlight, radiators, fireplaces, or other heat sources) can cause resin seepage, even through the stain. Clean the resin with turpentine if this happens. Apply a sealer to all four sides of the mouldings to prevent resin from dripping (consult your paint company for the appropriate sealer). Allow the wood to acclimate to the air and ambient heat for 48 to 72 hours before installation. Avoid long-term storage in the basement or an unheated garage.

Back to products list

Documentation

  • Technical drawing

Interested in our products?

Don’t hesitate to contact our customer service for information on the availability of our products or to find a dealer near you.

Contact us

Wood products tailored to your needs

Let’s discuss your manufacturing project together!

You know it best: the manufacturing industry is constantly evolving.

Interbois has always offered a wide range of products, based on rigorous and creative product development.

Interbois is a manufacturer dedicated to high-quality products and an essential partner in the evolution of your production. Our technical team is made up of skilled, innovative people with unique know-how.

We have extensive expertise in decorative components as well as windows and doors. We manufacture standard and non-standard wood and MDF components upon request.

Here is an overview of the products we can develop for your sector:

  • Panelling and shiplaps
  • Casings and frames
  • Door stops
  • Crossbars
  • Headers and thresholds
  • Extensions
  • Blow-outs
  • Astragals
  • Brick mouldings
  • Mouldings and wall coverings
Let’s discuss your manufacturing project together!