Rectangle

MDF is the name for medium density wood fibers. Resulting from a continuous industrial process, this panel is made of wood fibers and a synthetic binder. It is subject to temperature and pressure stresses.

Features and benefits:
• Less expensive than solid wood;
• Sold with two base coats at water-based, Interbois MDF moldings are already ready to receive the finishing paint;
• Flawless since its flat and smooth surface is uniform, dense and free of knots or grain patterns.
  

Specifics and Warnings: MDF moldings are sensitive to humidity and temperature fluctuations. Unless a coat of paint is applied on all four sides of the molding it is not recommended to use them in the basement or in the bathroom. Seal the top and bottom of the molding with a suitable product after installation.MDF is directly affected by ambient temperature and relative humidity. This material may contract or expand depending on these factors. 48 to 72 hours before installation allow the MDF to acclimate to air and ambient heat. Do not store it for long term in the basement or in an unheated garage.