Chair rail | Interbois

Consult our warranty

1519 - Chair rail - White primed MDF

Description

Chair rail

Dimensions

1-1/8" x 1-3/4"

Lenght(s)

8′

Quantity

Pallet : 384

Package : 8

Available materials

White primed MDF

Chair rails protect the walls against the marks that the back of chair can leave. They are also ideal to break the monotony of long surfaces.

The standard height of a chair rail varies between 36 and 42 inches from the ground. The height of the ceilings and the height of the plinths influence the height choice. Although a height of 38 inches is often ideal, it is always necessary to analyze existing constraints: air conditioning or heating system, electrical sockets or switches, etc.

The term MDF signifies medium density wood fibers. This panel is made of wood fibers and a synthetic binder from a continuous industrial process. It is subjected to temperature and pressure constraints.
Features and Benefits:
- Less expensive than solid wood;
- Sold with two water-based basecoats;
- Ready to receive finish paint;
- A flawless smooth flat surface that is uniform, dense and free of knots or grain patterns.
.

Specifics and Warnings:

MDF moldings are sensitive to humidity and temperature fluctuations. Unless a coat of paint is applied on all four sides of the molding it is not recommended to use them in the basement or in the bathroom. Seal the top and bottom of the molding with a suitable product after installation.

MDF is directly affected by ambient temperature and relative humidity. This material may contract or expand depending on these factors. 48 to 72 hours before installation allow the MDF to acclimate to air and ambient heat. Do not store it for long term in the basement or in an unheated garage.

The product you were looking for is not available here?
Find a distributor

Our distributors